Tuning Range
87.5MHz-107.9MHz in 100kHz steps
75-ohm (F)
50-ohm (BNC)
Sensitivity/SNR:
10dBuV required for 50dB mono-FM SNR, unweighted.
Reception Modes:
FM: Stereo / Forced Mono
HD Radio: HD1 through HD8
FM/HD1: ‘Split Mode’ delivers L+R FM to the left audio channel and L+R HD1 to the right.
Off-Air Frequency Response:
FM: ±.1dB, 20Hz-15kHz
HD Radio:
±0.25dB, 20Hz-20kHz
Stereo Separation:
FM: 60dB, 20Hz-15kHz
HD Radio: 90dB, 20Hz-20kHz
Distortion:
FM: <0.01% THD, 20Hz-15kHz
HD Radio: <0.003% THD, 20Hz-20kHz
FM De-emphasis: 75µs, 50µs or None, menu-selectable
Program Audio Outputs:
‘Assignable’ outputs utilizing XLR connectors.
Balanced Analog: Left and Right outputs adjustable from –15dBu to +15dBu in 0.1dB steps; 200Ω source.
AES Digital:
Adjustable from –30dBFS to 0dBFS in 0.1dB steps; 44.1kHz sample rate; 110 Ω transformer-coupled.
Dante/AES67 Compatible:
(RJ45) Output at 44.1kHz (Dante-only) or 44.1kHz/
48kHz (Dante /AES67); AoIP utility has independent IP, Audio Format and Transmit Flow settings; level adjustable from –30dBFS to 0dBFS in 0.1dB steps.
Headphone Jack:
(¼” TRS) with adjustable listening level.
Listening Stream:
Web browser ‘remote listening’ stream uses HE-AACv2 encoding, 44.1kHz or 48kHz sample rate, bit-rates from 18kbps to 64kbps; accommodates up to 10 simultaneous listeners. HTTP/Icecast and raw UDP streams are available simultaneously.
Composite/MPX Output:
(BNC) may be switched between MPX and 19kHz stereo pilot sample; adjustable from 1Vpp to 6Vpp in 0.05V steps.
LAN Port:
LAN connection to local network or Internet provides remote monitoring, control, listening and full SNMP implementation; user-programmable network setup and streaming parameters.
General Purpose Outputs:
Ten individual open-collector NPN transistor closures to ground are associated with alarm functions. Each is programmable for GPO assignment and logic polarity.
RDS Fields Displayed ## (Web only):
PS • PI • Call • RT • RT+1 • RT+2 • PTY • PTYN • CT • M/S • DI • TP • TA • AF • ODA • Block Error Rate • Groups & use statistics.
HD PAD Data Displayed ## (Web only):
Overview: Short Name • Universal Name •
Station ID • Slogan• Message • Station
Location • Service Mode • TX Blend • Emergency Alert
HD1-HD8, each:
Slogan • Program Type • Artist • Title • Album • Codec Mode • Bitrate • TX Gain • Logo/Artist Experience graphics and file details.
Bargraph & Numerical Level Metering:
Analog FM:
Carrier Modulation • Stereo Pilot & Subcarriers • Demodulated L/R & L+R/L-R • Stereo Separation • Stereo Crosstalk • BS.1770 Loudness • Synchronous & AM Noise.
HD Radio:
(simultaneously for HD1 and three other preselected HD programs)
L/R Audio • BS.1770 Loudness (absolute and relative to Analog FM Loudness).
FM/HD1 Alignment:
Timing offset and level and phase discrepancies between programs; ‘Confidence Factor’ display.
Graphic Displays/Plots ## (Web only):
RF Spectrum • MPX Spectrum • Audio Spectrum • Audio XY • Audio O’scope • FM Modulation History • Audio Level History • Metrics History • FM/HD1 Time & Level Alignment History • BandScanner™ utility.
Alarms:
Most alarms have multiple parameter settings. All alarms can send text or email notifications. Alarms are also logged: daily, weekly, monthly._
Analog FM:
Carrier Overmod • Audio
Loss • Low Signal • RDS Loss • PI Error • RT Update • Pilot Loss
HD Radio:
HD Loss • Program Loss • Audio Loss • HD Power Level • FM/HD1 Alignment • PSD Update • Logo Receipt • Artist Experience Update • Image Issues • Emergency Alert Updates
Real-Time Clock:
Auto-sets to Internet time; auto/manual DST setting; battery backup.
Power Requirement:
88-264Vac, 18W.
Operating Environment:
32°F/0°C-122°F/50°C; 0%-95% non-condensing
relative humidity; 10,000ft/3048m
Size and Weight:
25”H x 17”W x 3”D; 8 lbs. shipping weight.
